WATERTOWN, Wis. — A representative soil sample accurately captures the traits of the soil in that area. Every state in the US shares a bulletin discussing how to pull a proper soil sample. In Wisconsin, that bulletin is known as extension publication a2100. This scientific publication sums up soil sampling in four short pages. The first paragraph states, “An acre of soil to a 6-inch depth weighs about 1,000 tons, yet less than 1 ounce of soil is used for each test in the laboratory.” That number is quite staggering! Then to think, at a minimum, we are pulling one sample every five acres.
“That means we are trying to pull one soil sample to represent 10 million pounds of soil!” reels Scott Fleming, nutrient management specialist and sampling director for Rock River Laboratory “This is why pulling a high-quality soil sample is important every time we hit the field.” Fleming shares his tips for accomplishing just that to round out a successful 2021 crop season.
“The key to getting a representative sample is just like it sounds – to make the sample represent the sampled area,” says Fleming. “This sounds simple, but can get complicated when physically in the field.”
Many field features can pose challenges to the ideal representative sample. Current or removed fence rows, dead furrows, headlands, and point rows can all add unwanted variability to a soil sample.
“Other areas of concern are man-made – such as manure or lime piles,” explains Fleming. “Eroded or low areas should not be sampled unless these areas are large enough to warrant managing separately from other areas.”
He reminds those sampling that the soil sample should always represent what is in the field – taking care to only sample areas of the field that are not outliers.
Documenting where soil samples originated can save a lot of confusion when it’s time to make fertilizer decisions.
“It may seem easy to remember how you sampled the fields at the time of sampling, but when the data is reviewed those memories may fade,” says Fleming. “Another area that may require documentation is noting things that may change your soil test values such as abnormally dry soil moisture, manure or fertilizer application, or tillage prior to sampling.”
According to Fleming, all of these events could possibly create variability and unexpected soil test results. This type of documentation is especially important when reviewing samples after two or three resampling events.
Pulling soil samples in the proper location will mean nothing if they are not pulled at the correct depth. Fleming recommends, “when using a chisel plow tillage system, samples should be pulled at 2/3 of the tillage depth. This is generally seven inches deep for most growers.”
He explains that even though there is a target depth, samples could still get pulled too shallow or too deep. “This is likely due to poor equipment or improper use,” states Fleming. “A shovel can be used to collect a soil sample, but it is best to use a soil probe.”
Soil probes can be purchased for around $200. A local agricultural retailer or agriculture agent may also have a probe they loan out. Even with a soil probe, it is possible to pull a sample at the incorrect depth.
“Use a tape measure to establish your probe’s maximum depth,” recommends Fleming. “It is also a great idea to mark your probe at the proper sampling depth if this is less than your probe’s maximum depth.”
Ask for help
Soil sampling is one of the least expensive and most important things that can do good for a farm. Several resources exist that can assist to achieve proper soil sampling.
“Start simple by searching state extension or land grant university’s webpage for resources,” suggests Fleming. “A soil testing laboratory can be another great resource. Most laboratory webpages have their own soil sampling guides or links to university resources.”
However, online and print resources can only help so much. If questions arise that cannot be answered by such resources, experts like a local agriculture agent or fertilizer supplier can provide hands-on assistance.
“If too much soil sampling research leads to an analysis paralysis, these in-person resources can also help by actually pulling the samples,” says Fleming. “There is no shame in hiring an expert to pull quality, representative soil samples that provide accurate data in the long run.”
Founded in 1976, Rock River Laboratory is a family-owned laboratory network that provides production assistance to the agricultural industry through the use of advanced diagnostic systems, progressive techniques, and research-supported analyses. Employing a team of top specialists in their respective fields, Rock River Laboratory provides accurate, cost-effective, and timely analytical results to customers worldwide, while featuring unsurpassed customer service.
— Rock River Laboratory, Inc.
For more news from Wisconsin, click here.